Seiko RC-4400 Instruction Manual

HATTORI SEIKO CO., LTD.TOKYO, JAPANRC-4000/4400INSTRUCTION MANUAL© 1985 HATTORI SEIKO CO., LTD.COS/87 Printed in Japan

2-1 Data construction when used with a personal computer*The SEIKO RC-4000/4400 can store a total of 80 "lines" of data.* Each of these &quo

Data Transmission Mode1. How to transmit and receive data from another RC-4000/4400Data can be transmitted and received between different units of the

2. How to receive data from a personal computer(1) Connect the RC-4000/4400 to a personal computer using a wristplug and connecting cable as shown bel

(2) Switch over to "DATA OUT (H)" or "DATA OUT(L)" to start transmission by pressing button B. Referto "Precautions for Data

Trouble-shooting guideProblemThere is a startingbeep but the RC-4000/4400 is stillPossible Cause1. The personal computer stopped in themiddle of trans

Take Proper Care of Your RC-4000/44001) Water/PerspirationYour RC-4400 is not water resistant; care should be taken not to expose it to water orheavy

5) For your convenience* To adjust the wrist band, ask your dealer.* RC-4400 can have a plaque on its back for an engraving (e.g., your initials).30Ac

2. Connecting cableThe RC-4000/4400 is connected to apersonal computer using a special connect-ing cable. There are cables available forthe Apple II,

4. Bi-directional adaptor (RC-4200)This adaptor is used when data is trans-mitted from the RC-4000/4400 to a personalcomputer. For the method of data

SpecificationsMemory capacity:Display:Modes:Battery:Battery life:Operational temp, range:Casing:2K RAM3-line dot matrix LCD— time of day always displa

Table of contentsPrefaceIntroduction to the RC-4000 Series .Time Display Mode1. How to set the time2. How to set alarm on/off33. 6. 7. 7Data Mode 81.

MEMO

* Using an optional wrist adaptor RC-4300, data can be transferred between the two units ofRC-4000/4400.i; 0,, MOK,n S9ID'DB1 Data can be input b

Time Display ModeIn the Time Display Mode,the month, date, day, hours,minutes, seconds, alarm on/off and AM/PM symbolmarks are all shown.When button A

Data ModeData categories are Memo Data, Schedule Alarm and Weekly Alarm. Each category has anindividual label as a title.1. Using the RC-4000/44001-1A

• SCHEDULE ALARMI WEEKLY ALARM1-2 How to recall dataAt the time of purchase, the RC-4000/4400 has sample data with the following labels.Sample data it

When all data is cleared, the label will be displayed in the top left corner in the followingorder: M1, M2, M3, S.A and W.A. For changing to your own

* Month, day, hour and minute are set in exactly the same may as setting the time inthe Time Setting Mode with button E only.* The 12 character messag

1-8 How to change and add dataData can be changed and added using character input and line delete functions.(1) Display the data, you wish to edit by