Seiko DPU-3445 User's Guide download pdf (Page 17)

(6) Turn the printer over again. The ERROR lamp should be lit. Press the FEED

button once, and the printer will go into standby mode.

HINT

• To remove the paper, turn the printer off and open the platen cover.

Turn the printer over, and open the paper cover. The paper can be

removed by pulling it upward.

NOTE

 Insert the paper into the slot straight. If it is askew, a paper feed error

occurs.

 DO NOT block the paper outlet or hold the paper that is being loaded.

Otherwise, it may cause a paper jam.

 DO NOT force the paper holder, especially when the paper cover is

open.

Q Removing the Paper Holder

Cut sheets cannot be used with the paper holder installed. To use cut sheets,

remove the paper holder.

(1) Remove the roll paper from the paper holder.

(2) Open the paper cover, and push the right

and left tabs of the paper holder at the

same time to unlock them. The paper

holder can now be removed from the

printer.

HINT

• The printer function setting for cut sheets is different from that for roll

paper. When the paper type is changed, the function setting must be

modified accordingly. See Section 6, Function Setting, for details.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 32 33

No comments

Seiko DPU-3445 User's Guide Page 17