Seiko 5R86 Specifications download pdf (Page 15)

English

Trouble

The watch stops operating.

Even though you wear the watch every day,

the power reserve indicator does not move up.

The watch temporarily gains or loses

time.

The inner surface of the glass is clouded.

The watch stops even though the power

reserve indicator is not showing “0.”

Right after starting the watch, it seems

that the small second hand moves more

quickly than usual when setting the time.

The power supplied by the mainspring has been

consumed.

The watch is worn on your wrist only for a short

period of time, or the amount of arm movement

is small.

The watch has been left or worn in extremely

high or low temperatures.

The watch has been left close to an object with a

strong magnetic field.

You drop the watch, hit it against a hard surface, or wear it while

playing active sports. The watch is exposed to strong vibrations.

Moisture has entered the watch because the

gasket has deteriorated.

The watch has been left at a temperature below

0ºC.

When starting the watch, it takes a little time

before the adjustment function starts working

(this is not a malfunction).

Possible causes

The date changes at 12 o’clock noon.

AM/PM is not properly set.

TROUBLESHOOTING

Return the watch to a normal temperature so that it works accurately as usual, and then reset the

time. The watch has been adjusted so that it works accurately when it is worn on your wrist

under a normal temperature range between 5 ºC and 35 ºC.

Solutions

Refer to “HOW TO USE” section of this booklet to wind the mainspring and reset the time. While

you are wearing the watch or when you take it off, check the remaining power shown by the power

reserve indicator and wind the mainspring if necessary.

Wear the watch for an extended period of time, or when taking off the watch, turn the crown to

wind the mainspring if the remaining power shown by the power reserve indicator is not sufficient

for the next use.

Correct this condition by moving and keeping the watch away from the magnetic source. If this

action does not correct the condition, contact the retailer from whom the watch was purchased.

Reset the time. If the watch does not return to its normal accuracy after resetting the time,

contact the retailer from whom the watch was purchased.

Contact the retailer from whom the watch was purchased.

If the watch is left at a temperature below 0 ºC, it may stop if the power reserve indicator is showing

less than one-sixth of the power reserve. In such a case, turn the crown to wind the mainspring.

It takes several seconds before the adjustment function starts working. Set the time after the

small

second hand moves for approximately 30 seconds to set the time correctly.

Advance the hour hands for 12 hours to correctly set the time and date.

* In the event of any other problem, please contact the retailer from whom the watch was purchased.

1 2 ... 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Seiko 5R86 Specifications Page 15

Comments to this Manuals

Related products and manuals for Watches Seiko 5R86