Seiko 7T84 Specifications Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
85
TIMER MODE
◆The timer can be set to a maximum of 15 minutes in 1-minute increments.
The remaining time is indicated by the center hand and the two hands of the
small watch, which turn counterclockwise while the timer is counting down.
When the timer nishes counting down, the beep will sound indicating that the
time is up.
●How to use the timer
Pull out to fi rst click.
Press to set the mode indicator pointing
at the TIMER mode.
Push back in to normal position.
Now the timer is ready for use.
Press to set the center hand to show your
desired timer time.
With each press of button , the center hand moves one
minute forward, adding one minute to the timer time.
CROWN
A
B
CROWN
T
I
M
E
5
6
1
0
T
M
R
C
H
R
A
L
M
L
O
C
A
B
The numbers on the outer circle of the
dial indicated by the center hand shows
the timer time. (The short hand of the
small watch also indicates the timer time.)
84
<Example of use of the restart setting function in racing where the time from the warning
signal to start signal is defi ned as 5 minutes, and the time from the start signal to restart
signal is defi ned as 10 minutes>
The general recall signal is a signal issued when a number of yachts make false starts or violate
racing rules and the race committee is unable to identify or the starting procedures are incorrect.
For detailed rules on yacht racing, check the appropriate racing rules of each race.
For actual yacht racing, the restart setting function can be used in 5 minute yacht timer
measurements as follows:
<5 minutes prior to start>
<4 minutes after start>
Race proceedings
Warning signal
Start signal
General recall signal
Restart signal
Yacht timer starts.
(button A)
Stopwatch starts.
5'00" interval
Elapsed time
Yacht timer operation
Timer
Stopwatch
Timer
5'00"
interval
5'00" interval
5'00" elapsed
Stopwatch restarts.
Timer starts
from 2'30" to go.
7'30" elapsed
Keep pressing button A
for 2 seconds
(Timer restarts.)
Stopwatch
83
Example: When the restart setting function is activated during the stopwatch
measurement after the 5-minute yacht timer nishes counting down,
and 4 minutes has elapsed since then.
For the 5-minute yacht timer, restarts of the stopwatch oc-
cur at 5-minute intervals from the start of measurement.
For the 6-minute or 10-minute yacht timer, restarts of the
stopwatch occur at 6-minute or 10-minute intervals respec-
tively from the start of measurement.
Yacht timer starts.
(button A)
Stopwatch starts.
5'00" interval
Elapsed time
Yacht timer operation
Timer
Stopwatch
Stopwatch
5'00" interval
5'00" interval
5'00" elapsed
5'00" interval
Stopwatch restarts.
Timer starts from 1
'
00
"
to go.
4
'
00
"
elapsed
Keep pressing button A
for 2 seconds
(Timer restarts.)
TimerTimer
82
●Restart setting function
Yacht timer mode features a restart setting function, which enables you to
restart the measurement correctly and easily after an interruption during the
stopwatch measurement. This function is particularly useful when you have to
restart after a premature start in a yacht race.
The restart setting function can be used anytime while the stopwatch is meas-
uring following the yacht timer counting.
Pressing button for approximately 2 seconds will activate the restart setting
function.
Restart of the measurement will be made at regular intervals from the initial
start of the measurement.
The intervals between the initial start of the measurement and the subsequent
restarts are automatically decided according to the selected yacht timer which
had fi nished its counting before the stopwatch had started.
Page view 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Comments to this Manuals

No comments