Seiko BX-900 Owner's Manual download pdf (Page 58)

Label mode (valid only in fanfold setting)

Label mode is designed to prevent continuous forms labels from being peeled from the backing

sheet and becoming jammed in the printer.

When the bottom edge of the label is positioned on the round surface of the platen for more

than 10 seconds, the label is automatically repositioned away from the platen. When data is

received by the printer, the labels are automatically positioned to the top of the next available

label before printing begins. This function becomes effective when each label is equally apart

and the same page length (min. 2 inches) is set for a single label.

Setting of "Paper out" detection

In the "ANY POS" setting, "Paper out" detection is functioning at the any position.

In the case of "PAGE END":

For fanfold paper: "Paper out" detection functions near the perforation only. After

the detection, the print line feed data are not executed. With this

function the printing format is maintained even after the sheet

change.

For cut sheet paper: "Paper out" detection does not function within the paper size.

The "Paper out" detection functions when the LF is exceeded

over the paper size.

When a sheet shorter than the selection sheet size is printed. the

printing is made even if paper out.

Cut sheet feeder type

A function for defining the CSF configuration. The CSF type, single tray can be set when the CSF is

installed.

When single is selected, the paper tray (bin 1) can be selected by the BIN key on the front control panel.

Setting of the auto-scrolling position

Set the position for executing auto-scrolling.

In the case of "TOF ONLY" : Auto-scrolling is performed only

when the present position is at TOF .

"ANY POS" : If the perforation is between the paper cutter and

printing head position, auto-scroll is performed at any position

after a prescribed time after the printing.

49 CSF OPTION

NOT INSTALL

CSF: SINGLE

CSF: DOUBLE

50 SCROLL POS.

SCROLL:ANY POS

SCROLL:TOF ONLY

48 P.OUT DTCT

DETECT: PAGE END

DETECT: ANY POS

47 LABEL MODE

LABEL MD: NO

LABEL MD: YES

........... Set the label protect mode off.

........... Set the label protect mode on.

5. Extended setup options (47-50)

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 145 146

Comments to this Manuals

No comments

Seiko BX-900 Owner's Manual Page 58

Comments to this Manuals

Related products and manuals for Print & Scan Seiko BX-900