Seiko 7T82 Specifications Page 25

  • Download
  • Add to my manuals
  • Print
  • Page
    / 26
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 24
94
Pin
Adjustment hole
3)Pull the pin out of a adjustment hole
of the band. Slide the band to adjust
its length and find an appropriate
hole. Place the pin into the hole.
4)Fasten the buckle with pressing the
push buttons.
Battery life and its accuracy vary depending on the type of your watch.
Check the case back of your watch to identify the type of watch.
(Refer to " Daily care ".)
Battery/Battery life/Accuracy
Battery
life
7T82
Approx.
3 years
Battery
SB
BP ±15 seconds
Type of watch
(The first four digits of the caliber
number of your watch Ex. 7T82-0AC0)
 )
per month
Loss/Gain
○ The battery life shown above is for a watch with a new battery.
However, if the stopwatch is used for more than 2 hours a day, the battery life may be less than three
years.
○ The battery in the watch at the time of purchase is a monitor battery inserted in the watch at the factory
for performance checks, therefore, the battery may run down earlier than the above-specified period.
○ When the battery is exhausted, the second hand moves at two-second intervals.
While the small second hand is moving at two-second intervals, the time accuracy is not affected.
The accuracy is under the condition that the watch is worn on the wrist in a normal temperature range
between 5 and 35 .
○ Operational temperature range is -10 ∼+60 (14<∼140<)
96
95
Push button
1)Press the button on the buckle, and
lift to open the clasp.
2)To adjust : Pull the pins out of the
adjustment holes on the band. Slide
the band to the appropriate length.
Push the pins into the new holes on
the band.
C Type
Adjustment hole
Pin
97
Lumibrite
[If your watch has lumibrite]
LumiBrite is a luminous paint that is completely harmless to human beings and natural en-
vironment, containing no noxious materials such as radioactive substance.
LumiBrite is a newly-developed luminous paint that absorbs the light energy of the sunlight
and lighting apparatus in a short time and stores it to emit light in the dark.
For example, if exposed to a light of more than 500 lux for approximately 10 minutes,
LumiBrite can emit light for 5 to 8 hours. Please note, however, that, as LumiBrite emits
the light it stores, the luminance level of the light decreases gradually over time. The dura-
tion of the emitted light may also differ slightly depending on such factors as the bright-
ness of the place where the watch is exposed to light and the distance from the light
source to the watch.
<Reference data on the luminance>
(A) Sunlight
 [Fine weather]: 100,000 lux  [Cloudy weather]: 10,000 lux
(B) Indoor (Window-side during daytime)
 [Fine weather]: more than 3,000 lux  [Cloudy weather]: 1,000 to 3,000 lux
 [Rainy weather]: less than 1,000 lux
(C) Lighting apparatus (40-watt daylight fluorescent light)
 [Distance to the watch: 1m]: 1,000 lux
 [
Distance to the watch: 3m]: 500 lux (average room luminance) [Distance to the watch: 4m]: 250 lux
Page view 24
1 2 ... 20 21 22 23 24 25 26

Comments to this Manuals

No comments