Seiko LP-1020L User's Guide download pdf (Page 21)

2 LP-1020-MF/LP-1020L-MF

Remove the scanner exit guide.

Lift and pull the guide toward the rear to remove.

Close the scanner cover.

While supporting the scanner cover with your right

hand, release the stopper with your left hand and close

the scanner cover slowly.

Close the scanner cover completely until it clicks.

How to scan originals with a crease

If a creased original is scanned, switch the lever in advance.

Move the lever toward the rear of the device.

Open the scanner cover, and switch each lever on both

sides toward the rear.

Input the original.

Close the scanner cover, and set the original facedown.

◆ If the shadow of the crease still appears in

the scanned output, the shadow may be

reduced by reversing the inputting direction

of the original.

◆Removing original width guide

If the return of the original is changed between front and rear

exit frequently, remove the original width guide in advance.

Hook your finger on the claw at the bottom and while opening

the claw, pull towand you, and the original width guide will

be removed.

Note

◆ Take care that you pull toward you. Pulling down

on the claw could damage the claw.

Lever

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 29 30

No comments

Seiko LP-1020L User's Guide Page 21