Seiko TM-L60 Specifications download pdf (Page 49)

Chapter 2 Installation and Setup

The “Serial Port Settings” screen appears. Configure the settings of the

Serial port and click the [Next] button.

The display returns to the “Printer Configuration” screen. Click the [Add]

button to add a printer driver for the Customer Display.

The “Add Printer” screen appears. First select a printer driver to use for

the Customer Display. Then, select the Port Type setting same as that for

the TM printer made at Step 6 to 7 (example: "Connect to EPSON TM-

H6000III Receipt"), and click the [Next] button.

Setting Description

Printer name The printer name you entered at Step 6 is displayed. This cannot be

changed.

COM Port Specify the number of serial port used for connecting the printer.

Baud Rate Specify the baud rate.

Data Bits Specify the data bits.

Stop Bits Specify the stop bits.

Flow Control Specify the method of data flow between the computer and the printer.

Parity Specify the parity.

Setting Description

Select driver Select the printer driver for the Customer Display.

Printer name The name of the driver for the Customer Display.

Do not use Unicode/2-byte characters for the name.

Port Type Select an interface to use for connecting the Customer Display.

Set as Default Printer Select the printer driver for the Customer Display.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 83 84

No comments

Seiko TM-L60 Specifications Page 49