Seiko TM-L60 Specifications download pdf (Page 51)

Chapter 2 Installation and Setup

Connecting the devices

Confirmthefollowingbeforeconnectingdevices(TMprinter,CustomerDisplay)

•SettheHandshakingsettingoftheprintertoReceivebufferfull.

•ConfiguretheDIPSWwhenyouconnecttheDM‐D500withtheY‐connection.

ConnecttheTMprinter.ForinformationonhowtoconnecttheTMprinterandconfigurethe

DIPSW,seetheUsersManualsuppliedwiththeTMprinterortheTechnicalReferenceGuide.

Serial (COM) connection

Whenusingtheserialconnection,makesuretheprintersettingsmatchtheprinterdriverport

settings(BaudRate/DataBits/Parity/StopBits/FlowControl).

SettheHandshakingoperation(BUSYcondition)fortheTMprinterto[Receivebufferfullonly].

Formoreinformationaboutsettingmethodsandapplicablemodels,referto

page27.

USB connection

DonotconnecttheTMprintertothecomputerbeforeinstallingtheAPD.Incaseyouconnectthe

TMprinterfirst,deletetheportdriversandreinstalltheprinterdriverswithoutconnectingthe

TMprinter.

 The maximum number of printers that can be simultaneously connected to multiple

computers is 8.

 Turn off the power of the TM printer and wait for more than 5 seconds before turning on

the power.

USB device requirements

 Maximum USB cable length is 5m, and 5 cascaded hubs maximum.

 Use the USB cable and the USB hubs compliant with USB2.0 specification (12Mbps).

For USB power saving, see the C:\Program Files\EPSON\EPSON Advanced Printer Driver

4\TMUSB\readme_e.txt generated after the APD installation.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 83 84

No comments

Seiko TM-L60 Specifications Page 51