Seiko TM-L60 Specifications download pdf (Page 54)

Connecting the TM Printer

ConnecttheTMprinterfollowingtheprocedurebelow.

Check that “Receive buffer full” is set as a busy condition of the printer.

Connect the TM printer.

Fordetails,seetheC:\ProgramFiles\EPSON\EPSONAdvancedPrinterDriver4\TMUSB

\readme_e.txtgeneratedaftertheAPDinstallation.

Installing the printer driver

Theprinterdriverisautomaticallyinstalledwhentheconnectedprinteristurnedon.

Thefollowingmessageappearsinthelowerrightofthecomputerscreen.

 If you inadvertently connect the TM printer to the computer before installing the APD,

delete the corresponding port driver and then, without connecting the TM printer,

reinstall the printer driver.

 For information on how to connect the TM printer and check the DIP switch setting, see

the User's Manual supplied with the TM printer or the Technical Reference Guide.

 The maximum number of printers that can be simultaneously connected to multiple

computers is 8.

 Turn off the power of the TM printer and wait for more than 5 seconds before turning on

the power.

 USB device requirements

 Maximum USB cable length is 5m, and 5 cascaded hubs maximum.

 Use the USB cable and the USB hubs compliant with USB2.0 specification (12Mbps).

The printer driver cannot be added when the TM printer is offline (cover open, paper out,

and so on.) When it recovers from the offline status, the printer driver will be added.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 83 84

No comments

Seiko TM-L60 Specifications Page 54