Seiko TM-L60 Operator's Manual download pdf (Page 35)

ESC % n

[Name]

Select/cancels user-defined character set.

[Format]

<1B> H <25> H <n>

[Range]

255

[Description]

Selects or cancels the user-defined character set.

Only the lowest bit of n is valid.

When n = < ******* 1>B, the user-defined character set

is selected.

[Notes]

[Default]

[Reference]

When n = < ******* 0>B, the user-defined character set

is canceled (and the internal character set is selected.)

The user-defined characters and a down-loaded bit image can

not be defined at the same time.

n = 0

ESC &

ESC & s n m [a[p] s Xa]m-n+l

[Name]

Define user-defined characters

[Format]

<1B>H<26>H<s><n><m>[<a><p1><p2>---<psXa>]m-n+1

[Range]

s = 3

32 n m 126

0 a 12 (Font A)

0 a 9 (Font B)

0 p1 ... psXa 255

[Description] Defines user-defined characters for ANK character codes.

“s” specifies the number of bytes in the vertical direction.

. “n” specifies the beginning ASCII code for the definition and "m"

the final code. If only one character is defined, use n = m.

The allowable character code range is from ASCII code <20> H

to <7E> H and the maximum number of characters is 95.

“a” specifies the number of dots in the horizontal direction.

“p” is the dot data for the characters. The pattern for a dots is in

the horizontal direction from the left side. The remaining dot

pattern on the right side is space. The amount of data to be

defined is s X a.

[Notes]

After user-defined characters are defined once, they are avail-

able until another definition is made, until

ESC @

is executed, or

until the printer is turned off.

l The user-defined characters and a down-loaded bit image

cannot be defined at the same time. If this command is ex-

ecuted, the down-loaded bit image will be cleared.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 78 79

Comments to this Manuals

No comments

Seiko TM-L60 Operator's Manual Page 35

Comments to this Manuals

Related products and manuals for Print & Scan Seiko TM-L60