Seiko TM-L60 Operator's Manual download pdf (Page 40)

l A horizontal tab position is stored as the absolute value of

(character width X n ) measured from the beginning of the line.

The character width includes the character right-side spacing,

and double-width characters should be set with twice the width

of normal characters.

Up to 32 tab positions can be set. Data which exceeds 32 tab

positions will be ignored.

Set <n> k in ascending order and place a NUL code <00> H at

the end.

ESC D NUL clears all tabs. Any HT commands received after

clearing will be ignored.

[Notes]

When a data value <n> k is less than or equal to the preceding

value <n> k-1, the setting is considered to be finished. In this

case, the following data is processed as normal data.

l When a data value <n> k exceeds the number of characters

printable on one line, the setting is considered to be finished. In

this case, the following data is processed as normal data.

l Horizontal tab positions remain unchanged if the character

widths are changed after setting the horizontal tab positions.

[Default]

The default tab positions are at interval of 8 characters (9th col-

umn, 17th, 25th, ...) for Font A.

[Reference] HT

ESC E

[Name]

[Format]

[Range]

[Description]

[Reference]

Select/cancel emphasized mode

<1B>H<45>H<n>

0 n 255

Prints or cancels the emphasized characters.

This command is available for all character types.

When emphasized mode is selected, one dot is added to the

right side of the dots in normal mode.

Only the lowest bit of n is valid.

When n = < * * * * * * * 1>B, the emphasized characters are

selected.

When n = <* * * * * * * 0>B, the emphasized characters are

canceled.

ESC !

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 78 79

Comments to this Manuals

No comments

Seiko TM-L60 Operator's Manual Page 40

Comments to this Manuals

Related products and manuals for Print & Scan Seiko TM-L60