Seiko TM-L60 Operator's Manual download pdf (Page 57)

[Notes]

l The syntax to be used when setting data in the print buffer

should be based upon GS CO.

For count mode, see GS Cl or GS C;.

With counting up

If the counter value set by this command goes out of the counter

operation range set by GS Cl or GS C;, it will be forced to

convert to the minimum by GS c.

With counting down

If the counter value set by this command goes out of the counter

operation range set by GS C1 or GS C;, it will be forced to

convert to the maximum by GS c.

GS f n

[Name]

Select font for HRI characters.

[Format] <1D>H<66>H<n>

[Range]

n = 0, 1

[Description]

Selects a font for the HRI characters used when printing a bar

code.

selects the font from the following table.

Font

Font A

Font B

HRI means Human Readable Interpretation.

[Notes]

HRI characters are printed at the position specified by GS H.

[Default]

n = 0

[Reference]

GSH

GS h n

[Name] Select height of bar code

[Format]

<1D>H<68>H<n>

[Range]

≤

255

[Description]

Selects the height of the bar code.

n specifies the number of dots in the vertical direction.

[Default]

n= 162

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 78 79

Comments to this Manuals

No comments

Seiko TM-L60 Operator's Manual Page 57

Comments to this Manuals

Related products and manuals for Print & Scan Seiko TM-L60