Seiko TM-L60 Operator's Manual download pdf (Page 49)

GS FF

[Name]

Print and eject label

[Format]

<1D>H<OC>H

[Description]

Prints the data in the print buffer on the label and ejects it.

Ejects the label until it can be peeled off by fingers.

After ejection, an error LED is lit and waits until the paper feed

switch is pressed.

[Notes]

When the paper feed switch is pressed, it is assumed that the

label has been peeled off, and then paper feeding is performed

in the reverse direction to set the next label at the starting posi-

tion for printing.

After checking the error LED is lit, remove the label and then

press the paper feed switch once.

This command is effective only when “label print” is selected.

A FF or GS FF command must be sent after transmitting print

data for one label.

[Reference] FF

GS*n1n2[d]n1xn2x8GS*n1n2[d]n1xn2x8

[Name]

[Format]

[Range]

[Description]

[Notes]

[Reference]

Define down-loaded bit image

<1D>H<2A>H<n1><n2>[<d]n1Xn2X8

Defines a down-loaded bit image with the number of dots speci-

fied by nl and n2.

The number of dots in the horizontal direction is

1 X 8, and in

the vertical direction is n2 X 8.

“d" specifies the bit image data.

After a down-loaded bit image is defined once, it is available

until another definition is made, until ESC @ is executed, until

ESC & is executed, or the printer is turned off.

The relationship between the bit image data and the transmit-

ted dots is as follows:

The user-defined characters and a down-loaded bit image can-

not be defined at the same time. If this command is executed,

the user-defined characters will be cleared.

GS/

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 78 79

Comments to this Manuals

No comments

Seiko TM-L60 Operator's Manual Page 49

Comments to this Manuals

Related products and manuals for Print & Scan Seiko TM-L60