Seiko TM-L60 Operator's Manual download pdf (Page 4)

INTRODUCTION

The TM-T6O/T6OP and the TM-T8O/T8OP are a one-station printer for ECR

and POS use which can be used for printing the results of scaling or

measuring.

The main features are as follows:

. Light and ultracompact

. High-speed printing

. low-noise thermal printing

. High reliability due to a low number of moving parts

. Maintenance such as head cleaning performed easily

Command protocol based on ESC/POS

, a widely used standard

. Four-way

routing of the interface cable, drawer control cable, and

power cable on either side, underneath, or out the back of the case

. Easy access to the power switch on the front of the printer body;

access to both sides and the back not necessary

. Bar code printing possible using a bar code command

. 90’ character rotation possible

. Repeated operation and copy printing possible through macro definition

. Drawer control possible using the drawer-kick interface

Interface Paper Width

TM-T60

TM-T6OP

Serial

Parallel

60mm

TM-T80

TM-T8OP

Serial

Parallel

8Omm

Please be sure to read the instructions in this manual carefully before using your

new Epson printer.

The TM-T60 and the TM-T80 have a serial interface connector and the TM-

T6OP and TM-T8OP have a parallel interface one.

Except for the defferent roll width accommodated by the two printers, the

functions provided by the TM-T6O/T60P and the TM-T8O/T8OP are the same.

Most of the illustrations used in this operation manual show the TM-T6O/T6OP.

-ii-

1 2 3 4 5 6 7 8 9 ... 84 85

No comments

Seiko TM-L60 Operator's Manual Page 4