Seiko TM-L60 Operator's Manual download pdf (Page 59)

6 - 4 Program Descriptions

TM-T60/T80

1. Introduction

The TM-T6O/T80 is connected to the host computer by an RS-232C interface.

The TM-T60/T80 is easily controlled by sending data and commands from the

host computer.

The following examples use the main commands from MS-DOS BASIC.

Before Printing

Connect TM-T60/T80m to the host computer, power supply, and the drawer

while referring to Chapter 2.

Check that the RS-232C cable is connected properly, and the host

computer DIP-switches are set properly.

Check the TM-T60/T80 DIP-switches using the self test.

Connect the RS-232C cable to the host computer while referring to the

computer’s manual.

3. How to Write Program

Note: Omit step and if the drawer-kick connector is covered (the drawer

-kick function is not available).

For all programs, always first open device RS-232C.

100 OPEN "COM1:N81NN"

Initialize the TM-T60/T80

110 PRINT #1,CHR$(27);"@';

“PRINT #1” is the order that sends data and commands through the

device. This device is opened in step

"CHR$(27)"

is the ESC code.

-52-

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 84 85

No comments

Seiko TM-L60 Operator's Manual Page 59