Seiko TM-L60 Operator's Manual download pdf (Page 9)

1-2

Choosing a Place for the Printer

n Avoid locations that are subject to direct sunlight or excessive heat

(near heaters).

n Avoid using or storing the printer in places subject to excessive tem-

peratures or moisture.

Do not use or store the printer in a dusty or dirty location.

When setting up the printer, choose a stable, horizontal location.

Intense vibration or shock may damage the printer.

Ensure the printer has enough space to be used easily.

1-3 Removing the Protective Material

An orange plastic spacer is put into the printing mechanism section to

protect the printer from damage during transportation. Before you turn on

the printer, be sure to remove the spacer according to the following steps.

1. Open the printer cover.

2. Raise the head-open lever to remove the spacer.

3. Store it in the hollow space. Re-insert the space when transporting.

4. Lower the head-open lever.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 84 85

No comments

Seiko TM-L60 Operator's Manual Page 9