Seiko TM-L60 Operator's Manual download pdf (Page 57)

waits for the paper feed switch to be

pressed.

After the paper feed switch is pressed,

the printer executes the macro once.

The printer repeats this operation n1 times.

• If this command is received while defining the macro, the

macro definition is aborted, and the definition is cleared.

• If the macro is not defined or if n1 is 0, nothing is executed.

• Paper cannot be fed with the paper feed switch while

executing the macro when n3 is 1.

Not defined.

GS :

ESC = n

Select device

< 1B >

< 3D >

< n >

255

Selects a device to receive data from the host computer.

- If the printer is not selected, the TM-T60P ignores all

received data until it is selected by this command.

- Each bit of n is used as follows:

Bit

Function

Value

Printetr

Invalid Valid

Undefined

• Even when the printer is not selected, it may enter

the BUSY state due to printer operation.

n = 1

-50-

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 84 85

No comments

Seiko TM-L60 Operator's Manual Page 57