Seiko TM-L60 Specifications download pdf (Page 41)

1-34 Command Descriptions Rev. A

ESC T n

[Name] Set print direction in page mode

[Format] ASCII ESC T n

Hex 1B 54 n

Decimal 27 84 n

[Range] 0 ≤ n ≤ 3

48 ≤ n ≤ 51

ESC T n sets the print direction and starting position in page mode specified by n as shown below.

The default setting is n=0. This command is enabled only in page mode. If this command is entered in

standard mode, an internal flag is activated and the command is enabled when the printer returns to

page mode.

The parameters for the horizontal or vertical motion units (x or y) differ depending on the starting

position of the printing area as follows:

If the starting position is the upper left or lower right of the printing area (n=0, 2, 48, or 50):

❏ These commands use horizontal motion units: ESC SP, ESC $, ESC \

❏ These commands use vertical motion units: ESC 3, ESC J, GS $, GS \

If the starting position is the upper right or lower left of the printing area (n=1, 3, 49, or 51):

❏ These commands use horizontal motion units: ESC 3, ESC J, GS $, GS \

❏ These commands use vertical motion units: ESC SP, ESC $, ESC \

Print Direction Starting Position

0, 48 Left to right Upper left (A in the figure)

1, 49 Bottom to top Lower left (B in the figure)

2, 50 Right to left Lower right (C in the figure)

3, 51 Top to bottom Upper right (D in the figure)

Printing area

Paper feed direction

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 97 98

No comments

Seiko TM-L60 Specifications Page 41