1-44 Command Descriptions Rev. A
Paper sensor status (n=1, 49)
Drawer kick-out connector status (n=2, 50)
DLE EOT n
[Name] Real-time status transmission
[Format] ASCII DLE EOT n
Hex 10 04 n
Decimal 16 4 n
[Range] 1 ≤ n ≤ 4
DLE EOT n transmits the specified status in real time. This command is executed if the printer is off-
line, the print buffer is full, or an error occurs.
n indicates the status function as follows:
Bit Off/On Hex Decimal Status
0,1
Off 00 0 Paper roll near-end sensor: paper adequate.
On 03 3 Paper roll near-end sensor: paper near end.
2,3
Off 00 0 Paper roll end sensor: paper present.
On (0C) (12) Paper roll end sensor: paper not present.
4 Off 00 0 Not used. Fixed to Off.
5,6 — — — Undefined.
7 Off 00 0 Not used. Fixed to Off.
Bit Off/On Hex Decimal Status
0
Off 00 0 Drawer kick-out connector pin 3 is LOW.
On 01 1 Drawer kick-out connector pin 3 is HIGH.
1-3 — — — Undefined.
4 Off 00 0 Not used. Fixed to Off.
5,6 — — — Undefined.
7 Off 00 0 Not used. Fixed to Off.
n
Function
1 Transmit printer status
2 Transmit off-line status
3 Transmit error status
4 Transmit paper roll sensor status
Comments to this Manuals