Seiko TM-L60 Specifications download pdf (Page 79)

Rev. A Application 2-1

TM–L60II/L60IIP Information Manual

Chapter 2

Application

This chapter presents an example illustrating ESC/POS command functions and printing results. The

example shows how to issue a label containing bar codes. Set the paper selection function of the DIP

switch to thermal label before turning on the printer.

Bar Codes Label Issuing

Print Sample

Procedure Commands Used Description

1. Print message A ESC a, ESC !, LF Sets the print position to the center with ESC a and prints

message A with LF.

2. Print bar code GS H, GS f, GS h, GS k, ESC J Prints bar code after selecting the height of the bar code

with GS h and the printing position of the HRI characters

with GS H.

3. Print message B ESC a, ESC J Prints message B using ESC J.

4. Print date ESC a, ESC !, GS FF Sets the print position to the right using ESC a, selects font B

(9 x 24) with ESC !, and prints the date with GS FF.

*The paper LED blinks when the label is ejected from the

position where the label can be peeled off. Press the

PAPER FEED switch and peel off the label. The next label

feeds to the starting position.

1996.4.10

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 97 98

No comments

Seiko TM-L60 Specifications Page 79