Seiko TM-L60 Specifications download pdf (Page 81)

Rev. A Command Reference 3-1

TM–L60II/L60IIP Information Manual

Chapter 3

Command Reference

Command Classification

ESC/POS printer commands in this chapter are classified by function and by sheet and grade. The

sheet and grade classification is called matrix classification.

The sheet classification is divided into single sheet commands and multiple sheet commands. The grade

classification is separated into basic commands and extension commands.

Basic commands are defined as fundamental printer controls, including print commands and character

type selection commands. Extension commands are defined as control codes for functions specific to

individual printers. These commands are further divided into mechanical extension commands that

relate to additional mechanical functions such as stamp and auto-cutter units, hardware extension

commands that relate to additional hardware functions such as panel button control, and software

extension commands that relate to additional software functions such as user-defined and Bar code

control.

The commands can also be classified by function, which is how they are presented in Chapter 1 and

the Function Type table in this chapter. The function types, such as Print Commands and Line

Spacing Commands, are briefly explained in the corresponding sections of Chapter 1.

The illustration below shows the ESC/POS command overview diagram for printers.

Multiple sheet

Single sheet commands

Multiple sheet

Single sheet

Sheet

Basic commands

commands

Extension commands

Grade

Hardware extension commands

Mechanical extension commands

Software extension commands

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 97 98

No comments

Seiko TM-L60 Specifications Page 81