Rev. A Command Descriptions 1-53
TM–L60II/L60IIP Information Manual
GS H n
[Name] Select printing position of HRI characters
[Format] ASCII GS H n
Hex 1D 48 n
Decimal 29 72 n
[Range] 0 ≤ n ≤ 3
48 ≤ n ≤ 51
GS f n
[Name] Select font for HRI characters
[Format] ASCII GS f n
Hex 1D 66 n
Decimal 29 102 n
[Range] 0 ≤ n ≤ 1
48 ≤ n ≤49
GS H n selects the printing position of HRI characters when printing a bar code. n selects the printing
position as follows:
The default setting is n=0. HRI characters are printed using the font specified by GS f.
GS f n selects a font for the HRI characters used when printing a bar code. When n=0 or 48, the
12 × 24 font is selected. When n=1 or 49, the 9 × 24 font is selected. The default setting is n=0. HRI
characters are printed at the position specified by GS H.
n
Printing Position
0, 48 Not printed
1, 49 Above the bar code
2, 50 Below the bar code
3, 51 Both above and below the bar code
Comments to this Manuals