Seiko TM-L60 Specifications download pdf (Page 62)

Rev. A Command Descriptions 1-55

TM–L60II/L60IIP Information Manual

Macro Function Commands

The TM-L60II/L60IIP printers support the following macro function commands:

Command Name

GS : Start/end macro definition

GS ^ Execute macro

GS :

[Name] Start/end macro definition

[Format] ASCII GS :

Hex 1D 3A

Decimal 29 58

GS ^ r t m

[Name] Execute macro

[Format] ASCII GS ^ rtm

Hex 1D 5E rtm

Decimal 29 94 rtm

[Range] 0 ≤ r ≤ 255

0 ≤ t ≤ 255

0 ≤ m ≤ 1

GS : starts or ends macro definition. Macro definition starts when this command is received during

normal operation and ends when it is received during macro definition. Normal printing is

performed while the macro is being defined. If the printer receives this command again immediately

after previously receiving it, the printer remains in the macro undefined state. A macro is not defined

when the power is turned on.

The macro definition can contain up to 2048 bytes. If the macro definition exceeds this value, the

excess data is not stored.

GS ^ r t m executes a macro r times while waiting t × 100 msec for each macro execution. When m=0,

the macro executes r times continuously at the interval specified by t. When m=1, the printer waits for

the period specified by t, blinks the LED indicator, and then waits for the PAPER FEED button to be

pressed. After this button is pressed, the printer executes the macro once. The printer repeats this

operation r times.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 97 98

No comments

Seiko TM-L60 Specifications Page 62