Seiko 7C17 User Manual Page 36

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 35
Prev. maint. (cont.)
Lubrication: Use AFC or white, Lithium grease on the sides of the rails. Only apply a small
amount, approx. 0.2 grams. Replace the covers once grease has been applied.
Caution: a) Do not apply grease to Kevlar drive belt(s).
b) Power to the system must be disconnected.
Cleaning Feed Rollers Occasionally the feed rollers will have build-up of solder particles.
(bi-weekly) Simply use compressed air to blow the solder particles from the
feed roller housing. Remove the solder from the housing area by lifting
the feed disengage lever. Replace solder when complete, following
steps above.
Cleaning Geyan/ZSB The micro-gear of the Geyan feed rollers will tend to build up
Micro-Gear
(if applicable) with flux from the core of the solder wire. You will be able to
(bi-weekly) see the flux residue. Use a light brush and flux cleaner to remove the
flux from the gear teeth. Be careful not to bend or break the teeth of the
micro-gear.
Micro-Gear – One Side Only
RS-P / RS-L Iron Unit Grease bearings of cartridge holder and internal shaft of the iron
(approx. 6 months) unit. Remove the cover of the iron and lubricate moving parts. It may
be necessary to clean with alcohol to remove flux residue prior to
lubrication. The iron unit must be kept free from flux residue as this is
the main cause for pre-mature wear & failure.
Inside Cover
Silicone Ring Life is approx. 1 week. Replace as necessary. The heat of the
(weekly – as needed) iron tip will eventually wear the “grip” of the center of the ring. It will
fall from position, replace approx. once per week.
Bofa Fume Extraction The Bofa 200 fume extraction system has been installed on your
system. There are two filters inside the main cabinet. There is a pre-
filter and a Heppa filter. The life of the pre-filter will be 1~3 months
and the Heppa filter approx. 6~9 months.
Bofa 200 Pre-Filte
r
He
pp
a Filte
r
Page view 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 42 43 44

Comments to this Manuals

No comments